Відео

He hit that corner too fast...

Big ups nigga🙏🏾

all the parts i find are with out electronics the struts. Can u use the electric on my old strut?

Amazing thank you so much

I put the inner part of the pen in the whole and accidentally fell all the way down. Is it gonna be a problem?

How is your recovery from the ultra light crash?

Will this work on an 05 gmc envoy?

Thank you for the information, i can't believe its that easy. A shop just quoted me $260 for this job... needless to say, I walked out and will not be going back to them

You need to have more light on the door panel. We cant see anything but a dark shadow..

I got a question with the factory cassette radio you have there I have the same one. The volume control knob does not work properly anymore on the system it does however go up and down from the steering wheel. But with all of that being said I have no sound coming out of the back subwoofer. The speaker vibrates but there's no sound coming out of it. Can this be all a problem that the radio just needs to be replaced? I see them on eBay for an average of $150 I don't want to put no fancy Bluetooth in it or anything upgraded I just want one that'll work just like the one that's in the car now. I'm a stickler for keeping cars original anyway. Any knowledge would help if you believe that the radio just is not working anymore internally. Front speakers have sound by the way. I tried all the fade front back left right and I don't think it's a premium sound. Triangular speakers on the door to say Alpine. That's about it for the knowledge that I have and what it is doing.

Would this cause not showing the gears on the gear selector

Clear, concise and such a great video, especially including the nut size. Followed everything you did and had .the tube and dipstick changed in 10 minutes. Thanks so much!

Nice, I would like to put the regulators from the convertible in to drop them automatically.

What fuse should I be looking for on a 2011 Mazda axela?

Cagadas

So I just removed most of the center console so I could get access to the back of that control unit to change the bulbs, and there is no bulbs on the back. I watched your video and then screamed in to the void. Now I have about 25 M20 screws to put back. Urgh....

thank you so much for this video. i was picking up my mom and we got stuck a mile away from the house with no gas. we got an uber and got gas, some very nice men stopped to help us but still the gas wasn’t pouring. this video saved the day. thank you.

Works a treat - to improve the glue I had added a plastic wedge (old screw plug) in the gap behind the clip and visor panel.

Worked on me for a few hours but I have to put another pen. Had it checked, all fuse are in good condition also the battery. Now everytime Im driving I always bring 2 to 3 pens with me. What could be the problem?

Screwdriver works perfect

thank you so much saved me alot of money on towing my daughters car to the repair shop.

I ran across this video many years ago and it helped me, greatly, sorry i did not tell you then. At the time, sometimes when i dropped the drivers window it would also drop the rear quarter windows. No one seemed to know why. Your video showed me how to work around the issue. I have a 2003 xk8 conv. When i bought it 13 years ago, it would intermittently give me a "hood not latched" message, when top was up and latched, so unrelated to trying to operate the top. When i bought the car this was not mentioned. When it happened i was not to concerned since i thought the "hood" covered the engine, doh! The "hood not latched" message (randomly appears well after normal top raising operation) usually clears by the next day. Question: Is there any simple way to reset/force it go way? When the message is displayed on the message center the top can not be lowered with the top up/down switch. However, if you hit the top down button, the rear quarter widows drop. Again this video was also the fix to get the rear widows back up. I am selling the jag but knowing a way to eliminate/reset the " hood not latched" would probably be helpful. I have lived with the problem for 13 years, but it would be really helful for the new owner. Sorry for the bother. Best Regards, bill

NEED LIGHT TO SEE😊

I did this. It works great. Thank you from Philippines! 🙌🏽🙌🏽

Thanks a million!

What you call iron filings is mostly clutch material from the clutch packs in your automatic transmission. Normal wear & tear to have some. If it becomes excessive you'll get slipping issues. On the stuck fasteners, next time you take the pan down run an appropriate sized tap to re-establish the correct thread for those two bolts.

Great video! The issue is with my Mazda3 2016. The problem is that sometimes it is stuck and other times it isn't, so I believe it cant be the fuse because if it was it would never work. As a side note, I got a check engine code that states that the switch in the brake pedal for the brake lights is not working, Nevertheless, the brake lights do work. Do you thing this swatch might also "operate" the shifter "release" to start the shifter?

I appreciate your nicely detailed, (no hub bub) DIY tutorial! Thank you for lesson. I will remember this for my future needs! Great Job!

Hey do you know where the fuel sender unit is placed on this? I've seen other people have a straightforward design where the sender unit is right there on the front of the tank where you can easily access it but on mind it's just a blank hole like yours

I am at gas station; I just fix/help someone's MAZDA Thanks for video.

Radio Shack is in business... I can not find any store here in the United States of America...

Having this problem you just saved me thank you

YOU ALSO HAVE NO BRAKE LIGHTS WHEN THIS HAPPENS

Hi Sam! Thank you so much for this video! I am trying to do a similar thing but from a leaper emblem to a repeater. Would you have any idea how to get the emblem off the housing? I managed to pull the emblem off thanks to your video, but I cannot pull it out from the housing and I cannot find any instructions online.

Could we get a closer look at the modified or later model cupholder hinge arrangement please . I have one I need to add a proper hinge rather than the plastic lugs currently broken . Thanks Ian M. Perth ,West Australia

Mine is that same yellow tube. But when I went to pull it out, it was stuck. My mother had it serviced some months ago and I was never informed or given instructions on how to pull it out when it's locked in place and last night I broke it trying to figure out how to get the stick out. Now it needs a new replacement from the new replacement. 🙁

and my company thinks I am to high paid

Thank you SAM you don't know how much you have helped me by making this video thank you again SAM

Thx, my Mazda 3S gets stuck in park slot. You've spared me from a big trouble.

I am guessing you can use this procedure to do conversion from Halogens to LEDs?

Ty

Throttle on mine is slight sluggish too.... hopefully this fixes the problem and i dont have to get a new throttle body :(

Thank you!

Where did you get the fabric from?

That could have been a lot worse

Going to fast

I have a Mazda 6 that's doing this...gonna check this

It worked within 5 seconds ..... Thank You Sir !!!

This video is perfect to understand. Sometimes people do easy things so hard like: DO THAT, YOU NEED THIS TO UNLOCK THIS, AFTER THAT YOU HAVE TO DO THIS ... DUDE JUST MAKE IT SIMPLE YAOOO. and you video is PERFECT my man

Concrete mixer truck. Not cement truck